This can be accomplished by using CC1 together with a Docking Station (Workstation) and setting up scheduled tasks for CC1.

It is recommended to inspect the cleaning robot approximately every 2 days to ensure proper functioning. The brushes, dust box, water filter box, scrubbing squeegee rubber strips, Mopping-vacuuming Part Mop, side brush, and filter cartridge should be replaced roughly every 3 months. However, the actual replacement frequency may vary depending on the specific cleaning conditions and how frequently the robot is used. You can refer to the consumables replacement frequency table for more specific guidelines.

The cleaning report is uploaded immediately after the completion of the cleaning task. If there is no Internet connection available, the report will be uploaded during the next software startup. It is planned to optimise the logic in the new version.

If we consider a minimum cleaning efficiency of 700 square meters per hour, the amount of water used per square meter is estimated to be around 10 mL. So, for every hour of cleaning, the robot will use approximately 3000 mL for low water speed cleaning, 4800 mL for medium water speed cleaning, and 7200 mL for high water speed cleaning settings.